PackworldUSA with TOSS Technology Heat Sealing Equipment
Customer Service 610-746-2765

PW4000 VP Series
Clean Room, Vacuum Impulse Heat Sealer
PW4000 24" and 36"

Vacuum System for package evacuation with Purge Cycles

The combination of the exclusive TOSS Technology with advanced PIREG® temperature control —The Optimum Sealing System— and Packworld's special jaw bar band material ensures that every machine we build delivers on our promise of Perfect Seals...Every Time.

The PW 4024 Heat Sealer provides the safety and assurance needed by the medical and other industries where perfect temperature control is essential.
View Product Video

Packworld Heat Sealers produce repeatable, high quality heat seals each and every cycle thanks to the TOSS Alloy-20® heat seal band. This allows us measure temperature across the entire length of the band to eliminating the lag between actual and measured temperatures. The instantaneous and continuous feedback permits high response for greater productivity.

Control System

The control system provides the safety and assurance required by industries when perfect temperature control is essential. Repeatable, high quality heat seals are made each and every cycle. The system utilizes the TOSS Alloy-20 C heatseal or cut and seal band as the temperature sensing means, thereby eliminating the lag between actual and measured temperatures. The instantaneous and continuous feedback permits high response for greater productivity.

Precision Heat Seal Control

The versatile impulse heat seal controller, RES-440, provides digital display of menu driven time/temperature profile with various time sequence possibilities. Time and temperature are keypad programmable with the cooling cycle controlled by either time or temperature. Actual temperature is displayed in real time and repeatable. Machine can be fitted with any one of over 300 different TOSS Alloy–20 heatseal bands or wires depending upon the results desired.

FDA/GMP Validation

Designed for validation, these heat sealers provide verification and feedback on all heat sealing parameters. Temperature and timing functions are set with keypad accuracy and can be verified with the display and with Data Capture with USB connection. Heat sealing time begins only after the prescribed temperature has been reached. The jaws remain closed until the heat seal cool down temperature is reached. Visual lock-out alarms alert the operator of functional problems. Heat sealing pressure is easily adjustable.

  • Internal high performance vacuum generator
  • Automatic vacuum cut-off at selected vacuum level
  • Automatic nozzle retract
  • Vacuum system-disable capability
  • Automatic abort if pre-selected vacuum level is not met
  • Customer supplied inert gases for purge cycle
  • Spring loaded gripper bars to close package while evacuating
  • Low-pressure close to facilitate vacuum system operation

Product Details



PW4024 Vacuum/Purge
PW4036 Vacuum/Purge


Medical Devices
Clean Room Applications
Large Product Packaging
Research & Development


All-stainless steel construction
Enclosed sealing jaws
Menu Driven Micro-Processor
Selectable Temperature, 0 - 500°C
High/Low Temperature Alarm and Lock-Out
Adjustable Heat Seal Pressure
High/Low Heat Seal Pressure Alarm
Self Diagnostics
Digital Air pressure regulator, gauge and Hi/Lo alarms
Stainless Steel construction
Single or double band heatseal operation
Emergency stop button
Foot Pedal Activation


Calibration made simple
Easy change over of heatseal bands
Precise and repeatable heat sealing control
Ease of operation
Clean room ready
Adaptable to a wide variety of uses
Maintenance Free
Safety Assured


Data Capture with USB connection and PC Software
NIST traceable calibration
Stainless Table for product placement
Jaw modifications for water cooling
High Temperature Application Set-up
CE Compliance
Automatic Vacuum and Purge System
Stainless and Aluminum Adjustable Height Stand


Heat Seal Length: 24 and 39 Inches

Heat Seal Width: 2 - 12 mm

Temperature Range: 0 - 500°C

Timers: 0 - 99.9 Sec

Power: 115 or 230 VAC 50/60 Hz (PW4036 - 230V)

Air Pressure: 80 - 100 psig

28" x 15" x 12" (PW4024)
42" x 15" x 12" (PW4036)

All Packworld-built machines are fully validatable, ensuring that your packaging
will meet even the most demanding requirements. We offer precision heat sealing
equipment ranging from bench top models to floor-standing production machines,
all powered by TOSS Technology with advanced PIREG® temperature control
—The Optimum Sealing System—
for consistent, validatable and repeatable results, every time.

9 Steps to Heat Sealing PerfectionFree Booklet!
Get our free "9 Steps
to Heat Sealing
Perfection" booklet.
Request your copy today!
Learn More


PackworldUSA is a manufacturer and distributor of validatable heat sealing equipment ranging from benchtop heat seal models to floor-standing heat seal production machines including vacuum/purge and heat seal/cut packaging capabilities for a variety of heat seal materials and pouch shapes.

All of our energy and engineering resources are dedicated to designing heat seal machines that meet today's most stringent validation requirements. Our heat sealing machines meet the FDA/GMP/NIST validation requirements demanded by the medical, pharmaceutical, and bio tech industries, so you can be sure that they'll meet your needs no matter what your application is.

heat sealing headaches? NO MORE! eliminate them with Packworld USA. We take away the pain of heat seal failures.

Green Every Day

Sustainable and green initiatives are becoming increasingly important in today's business climate, as companies restructure their supply chains to reduce their carbon footprint, while also improving their bottom line.
Learn More

TOSS Technology precision impulse heat sealing controls and components.

TOSS Technology with advanced PIREG® temperature control precision impulse heat sealing controls and components.

TOSS Forming Collars and Sets

Custom designed round and
rectangular formers as well as
edge folding units and accessories.
Call 610-759-8883

Imagine Sustainability

Imagine Sustainability with TOSS Impulse Heat Seal Controls

TOSS Pneumatic Ball Slide

TOSS pre-engineered and proven Pneumatic Ball Slides do it all with minimal design and assembly effort.
TOSS Pneumatic Ballslide

Site contents ©2021 PackworldUSA. All rights reserved.